INSTRUCTIONS
Follow these step-by-step directions when using E6000 Glue:
Read directions and test small area before use.
- Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
- Puncture seal in neck of tube using pointer cap. Replace cap. Screw precision tip into top of tube cap if present. Replace with fresh tip as needed.
- Ideal application temperature range is 10 to 32 ºC. However, fully cured adhesive can withstand temperatures from -40 to 82 ºC intermittently.
- Apply directly to surfaces to be bonded or repaired.
- Allow 24 hours for curing. Depending on materials and temperature, maximum bond strength may not be reached for up 48 to 72 hours.
- For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
- Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.
Note: May damage finished surfaces. Avoid such contact until completely dry. Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam™ or paper products. Not recommended for any items that come into contact with food, drinking water or animals. Do not dry clean.